复杂载荷作用下立管触地段损伤管道的动力响应     

代云云  周晶  李志刚 《中国海洋大学学报(自然科学版)》2020,(1):145-153

触地段(Touchdown zone, TDZ)是在役钢悬链线立管(Steel catenary riser, SCR)的关键部位,在复杂载荷作用下,极易形成损伤缺陷,其载荷寿命的评估是深海结构工程中的一个关键问题。本文以大型有限元软件ABAQUS为平台,运用损伤管道实体单元与土弹簧阻尼单元相互作用的模型模拟触地段损伤海底管道在复杂载荷作用下的动力响应,数值计算考虑了管-土相互作用过程中的材料非线性、几何非线性以及接触非线性。讨论了单一环向体积损伤位于触地段管道的不同位置时,触地段损伤管道在不同载荷作用下的动力特性及特征点的动力响应。结果表明,管道所受内外压力以及管道提升端的竖向位移载荷会影响结构的自振频率;体积损伤部位的动力响应较完好部位更剧烈;体积损伤的位置和动力载荷频率对管道动力放大系数的影响很大;当动力载荷的激励频率越接近结构基频时,损伤管道的动力响应及动力放大系数越大。  相似文献   

Building a model-based personalised recommendation approach for tourist attractions from geotagged social media data     

Xiaoyu Sun  Xia Peng  Yiran Chen  Yu Liu 《International Journal of Digital Earth》2019,12(6):661-678

When travelling, people are accustomed to taking and uploading photos on social media websites, which has led to the accumulation of huge numbers of geotagged photos. Combined with multisource information (e.g. weather, transportation, or textual information), these geotagged photos could help us in constructing user preference profiles at a high level of detail. Therefore, using these geotagged photos, we built a personalised recommendation system to provide attraction recommendations that match a user's preferences. Specifically, we retrieved a geotagged photo collection from the public API for Flickr (Flickr.com) and fetched a large amount of other contextual information to rebuild a user's travel history. We then created a model-based recommendation method with a two-stage architecture that consists of candidate generation (the matching process) and candidate ranking. In the matching process, we used a support vector machine model that was modified for multiclass classification to generate the candidate list. In addition, we used a gradient boosting regression tree to score each candidate and rerank the list. Finally, we evaluated our recommendation results with respect to accuracy and ranking ability. Compared with widely used memory-based methods, our proposed method performs significantly better in the cold-start situation and when mining ‘long-tail’ data.  相似文献   

驯化水温及温升速率对三门湾三种虾蟹类热耐受性的影响   总被引：1，自引：1，他引：0  

田洪林  曹亮  刘金虎  窦硕增 《海洋科学》2018,42(4):43-52

作者采用动态实验法与静态实验法相结合的方法,研究了三门湾脊尾白虾(Exopalaemon carinicauda)、口虾蛄(Oratosquilla oratoria)和日本(Charybdis japonica)在不同季节的基础水温即驯化水温(8~29℃)和温升速率(0.5~15.0℃/h)下的热耐受能力。结果表明,驯化水温和温升速率对各实验动物的热耐受性均有显著影响。实验动物的热耐受性与驯化水温总体上呈显著正相关,而温升速率对热耐受性的影响具有物种特异性,并受驯化水温制约;在不同驯化水温下,各实验动物的热耐受性随温升速率增大呈不同变化趋势。各实验动物的24 h高起始致死温度受驯化水温的影响显著,随着驯化水温从8℃升高到29℃,脊尾白虾、日本和口虾蛄的24hUILT50分别从24.2、34.6、24.9℃显著增大到35.3、37.4和34.4℃。结合3种实验动物的最大临界温度分析,它们的热耐受能力依次为:日本脊尾白虾口虾蛄。研究结果可为探究三门湾水域潜在的热污染状况及其生态环境效应提供科学依据。  相似文献   

北太平洋副热带模态水盐度的年代际变化     

胡睿坤  边志刚  刘子洲  刘聪  翟方国  顾艳镇 《中国海洋大学学报(自然科学版)》2020,(2):9-21

副热带模态水(Subtropical Mode Water;STMW)在气候变化中起着重要作用。本文利用全球高分辨率数值模拟结果,研究了北太平洋STMW核心层盐度(Core Layer Salinity;CLS)的年代际变化及其物理机制。结果表明,CLS存在显著的年代际变化,其空间分布则与背景流场分布特征有关。侵蚀区CLS滞后生成区CLS约1~2年,这主要是海流平流输运引起的。生成区内,STMW的季节循环一般可分为生成期(12-4月)、隔离期(5-6月)和侵蚀期(7-11月),生成期混合层盐度(Mixed Layer Salinity;MLS)决定着隔离期和侵蚀期的CLS,而MLS年代际变化则主要由同太平洋年代际涛动存在负相关性的海表面淡水通量的变化引起。  相似文献   

边带分离型超导SIS接收机本振耦合噪声研究          下载免费PDF全文

李振强  张旭国  李积斌  左营喜  徐烨  张海龙  金风娟 《天文学报》2020,61(2):18-84

超导SIS (Superconductor-Insulator-Superconductor)接收机因极低的接收机噪声温度成为毫米波和亚毫米波段射电天文观测的首选.本振系统耦合噪声也是接收机噪声的一部分,在多年的天文观测中,发现本振耦合噪声无法完全忽略,对天文观测的灵敏度有一定影响.采用两个不同种类的信号发生器作为本振系统初级信号源,测试了超导SIS接收机的噪声温度,发现信号发生器输出的基底噪声能够耦合到接收机内部,从而增加接收机噪声强度.分析研究了本振系统热噪声和信号发生器基底噪声对接收机噪声的影响.通过在信号发生器输入端加入窄带滤波器滤除其基底噪声,消除了信号发生器基底噪声引入的接收机噪声,降低了接收机的整体噪声,提高了望远镜的灵敏度.  相似文献   

Burial and exhumation of the Hoh Xil Basin,northern Tibetan Plateau: Constraints from detrital (U-Th)/He ages     

Jin-Gen Dai  Matthew Fox  David L. Shuster  Jeremy Hourigan  Xu Han  Ya-Lin Li  Cheng-Shan Wang 《Basin Research》2020,32(5):894-915

The uplift and associated exhumation of the Tibetan Plateau has been widely considered a key control of Cenozoic global cooling. The south-central parts of this plateau experienced rapid exhumation during the Cretaceous–Palaeocene periods. When and how the northern part was exhumed, however, remains controversial. The Hoh Xil Basin (HXB) is the largest late Cretaceous–Cenozoic sedimentary basin in the northern part, and it preserves the archives of the exhumation history. We present detrital apatite and zircon (U-Th)/He data from late Cretaceous–Cenozoic sedimentary rocks of the western and eastern HXB. These data, combined with regional geological constraints and interpreted with inverse and forward model of sediment deposition and burial reheating, suggest that the occurrence of ca. 4–2.7 km and ca. 4–2.3 km of vertical exhumation initiated at ca. 30–25 Ma and 40–35 Ma in the eastern and western HXB respectively. The initial differential exhumation of the eastern HXB and the western HXB might be controlled by the oblique subduction of the Qaidam block beneath the HXB. The initial exhumation timing in the northern Tibetan Plateau is younger than that in the south-central parts. This reveals an episodic exhumation of the Tibetan Plateau compared to models of synchronous Miocene exhumation of the entire plateau and the early Eocene exhumation of the northern Tibetan Plateau shortly after the India–Asia collision. One possible mechanism to account for outward growth is crustal shortening. A simple model of uplift and exhumation would predict a maximum of 0.8 km of surface uplift after upper crustal shortening during 30–27 Ma, which is insufficient to explain the high elevations currently observed. One way to increase elevation without changing exhumation rates and to decouple uplift from upper crustal shortening is through the combined effects of continental subduction, mantle lithosphere removal and magmatic inflation.  相似文献   

龙泉山断裂带断层最新活动年代及方式     

刘亮  梁斌  燕中林  苏画  何学锋 《中国地质调查》2020,7(5):77-87

龙泉山断裂带属龙门山前陆隆起,与青藏高原龙门山的隆升演化密切相关。为探讨龙泉山断裂带断层活动方式、期次及年代特征,在该断裂带不同部位采集了断层泥样品,通过扫描电镜(SEM)对样品中的石英颗粒进行了痕迹微形貌和溶蚀微形貌观察,通过电子自旋共振(ESR)测试了样品断层的最新活动年龄,并结合区域地震资料,进一步研究了龙泉山断裂带断层的发震潜力。结果表明: 龙泉山断裂带断层运动方式以黏滑为主,兼蠕滑; 具有多期次活动特征,强烈活动时间为早更新世—中更新世,晚更新世也有明显断层活动,全新世断层活动不明显; SEM 、ESR、热释光(TL)测得的断层最新活动年龄为(1 210±121)~(110±10.0) ka; 最新活动年代和活动性具有分段性,中段断层活动性较弱,北段和南段断层活动性较强。总之,龙泉山断裂带为1条活动性断裂带,具有一定的发震潜力,地震沿断裂带呈带状分布,但相比其西侧的龙门山断裂带,其活动性已大大降低。  相似文献   

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province: Based on the breakthrough of 3000 m exploration drilling     

《China Geology》2020,3(3):385-401

Recently, continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China. Approximately 5000 t of cumulative gold resources have been explored in Jiaodong, which has thus become an internationally noteworthy gold ore cluster. The gold exploration depth has been increased to about 2000 m from the previous <1000 m. To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m, the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named “Deep drillhole ZK01” to a depth of 3266 m. Hence, as reported herein, the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented. ZK01 is, to date, the deepest borehole with an gold intersect in China, and constitutes a significant advance in deep gold prospecting in China. The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources, while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources. The Jiaojia Fault Belt tends to gently dip downward, having dip angles of about 25° and about 20° at vertical depths of 2000 m and 2850 m, respectively. The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing, alteration, mineralization, and tectonic type. The deep zones can generally be categorized from inside outward as cataclastic granite, granitic cataclasite, weakly beresitized granitic cataclasite, beresitized cataclasite, and gouge. These zones exhibit a gradual transitional relation or occur alternately and repeatedly. The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development; that is, the higher the pyrite content, the wider the veins and the higher the gold grade. Compared to the shallow gold ores, the deep-seated gold ores have higher fineness and contain joseite, tetradymite, and native bismuth, suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization. ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane (gouge) and hosted within the Linglong Granite, contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro. These new discoveries are particularly significant because they can help correct mineralization prospecting models, determine favorable positions for deep prospecting, and improve metallogenic prediction and resource potential evaluation.  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献   

渤海湾盆地歧口凹陷地层压力结构特征     

姜文亚  宋泽章  周立宏  蒲秀刚  王娜  代昆  万伟超  刘祥柏 《吉林大学学报(地球科学版)》2020,50(1):52-69

深化含油气沉积盆地的压力结构研究，厘清异常压力的空间展布，对划分含油气系统、评价有利输导体系与明确勘探甜点区带具有重要的理论和实践意义。为深化渤海湾盆地富油凹陷的油气二次勘探，本文以歧口凹陷为研究对象，对其压力结构进行重点刻画。在实测地层压力的校正下，综合单井、连井和二维地震地层压力结构分析，厘清了歧口凹陷的压力结构特征，识别出4类纵向压力结构：①单超压带结构；②双超压带结构；③多超压带结构；④静水压力结构。纵向上，歧口地区存在3类纵向压力系统样式——单超压系统、双超压系统、静水常压系统。双超压系统是歧口凹陷的主要压力系统样式，广泛发育于主凹和各大次凹；从凹陷中心向盆地边缘，双超压系统逐渐向单超压系统、静水常压系统过渡。单超压系统主要分布于盆地边缘的斜坡和潜山区，如歧北高斜坡、羊三木-扣村潜山等。静水常压系统则主要分布在离深凹区更远的沈青庄潜山和埕北斜坡区域。上部超压系统和下部超压系统的顶板分别位于东营组和沙三段内部，侧向上受盆地边缘和深大断裂控制。上部超压系统的形成主要受欠压实作用控制，以歧口主凹为中心呈环带分布；而下部超压系统的形成主要受生烃作用控制，以主凹和几大次凹为中心分布。未来，下部超压系统中保存的天然气将成为歧口地区超深层天然气勘探的重点对象。  相似文献